ABB IndustrialIT Compact HMI 800 Getting Started page 174

Creating a 3-Way Valve Element
Figure 122. Icon indications for Valve3Way
6. Create an AlarmState, WarningLevel and a ManIndication element by
double-clicking and place them next to the valve element.
If the Property for the AppError is set to Bad, it is easier to place the
Indicators in suitable positions.
Don not forget to set back the AppError too Good before you Deploy the
Graphical Element.
7. Select the Valve3Way Element. Via the Properties window, and connect the
AnswerOpened1Ref property to the process signal corresponding to the signal
indicating that the valve is open. See
174
Section 8 PLC Connect Graphic Elements
Figure 123.
3BSE040587R4401