Opc Server For Ac 800M Is Preinstalled - ABB IndustrialIT Compact HMI 800 Getting Started

Section 3 Installation
5. Select this user as shown above and insert the user name and password for the
user that should be logged on when using the AC 500 Control Builder.
(typically the user AppEng).
6. Click OK and close the application and the system is ready to be used for both
configuration and operation with the AC 500 controller.

OPC Server for AC 800M is Preinstalled

If you are using AC 800M controllers, the Compact HMI 800 is ready to connect to
the AC 800M controller out of the box. The OPC server is installed and the
Compact HMI 800 has been configured accordingly. How to connect AC 800M, see
Figure 20
Power Cord
Figure 20. AC 800M connections
3BSE040587R4401
Control Network
OPC Server for AC 800M is Preinstalled
Serial Communi-
cation, like Comli
or Modbus
Tool port, to get log files
to hyperterminal or to
set the IP address
43