Supported Standard Plcs - ABB IndustrialIT Compact HMI 800 Getting Started

Supported Standard PLCs

–
The PCs are delivered and configured to automatically work together as one system.
If more than one server, and four clients will be connected to the same network, the
IP addresses has to be changed. See
Supported Standard PLCs
We support communication with, and guarantee compatibility with all PLCs or field
devices that are compliant to the communication standards: OPC, Modbus RTU,
Modbus TCP, SattBus and Comli.
The Compact HMI 800 supports connections to PLCs both via OPC with specific
communication hardware as well as via serial communication channels.
Besides the serial channels, there is no upper limit on how many PLCs that may be
attached to the system. Instead the total number of communicating signals that are
limited by the purchased license size.
System Power-up
Connect the keyboard with mouse in one of the USB ports in the front of the PC, or
in one of the upper USB ports on the rear side. Connect the power cord, and the
network cable to the PC's. Put the dongle in one of the USB ports in the server. See
Figure 5
28
one product box per PC. Including Getting Started manual, one mouse
pad, one Restore Client DVD
IP Addresses and Workgroups
Section 3 Installation
on page 44.
3BSE040587R4401