ABB IndustrialIT Compact HMI 800 Getting Started page 172

Creating a Pump Element
7. Select the pump element. Via the Properties window, connect the
AnswerOnRef property to the process signal corresponding to whether the
pump is on or not. Use the Direction property to set the direction of the valve
(up, down, left or right).
8. Select the AlarmState element. Via the Properties window, connect the
AlarmStateRef property to the pump object type property AlarmState of
AlarmStatus type.
9. Select the WarningLevel element. Via the Properties window, connect the
WarningLevelRef property to the pump object type property WarningLevel.
10. Select the ManIndication element. Connect the AnswerManRef property.
Use the Inverted property if you need to invert the indication. See
Figure 120. Inverted connection
11. Click in an empty space in the design window to deselect any graphic element.
The design window itself is to be selected.
In the Properties window, set the BackStyle property to Transparent.
Set the Windowless property to True.
12. Resize the design window to cover only the created graphic element.
13. Deploy the aspect.
172
Section 8 PLC Connect Graphic Elements
Figure 120.
3BSE040587R4401