Import To Compact Hmi 800 - ABB IndustrialIT Compact HMI 800 Getting Started

Import to Compact HMI 800

2. Open the Import Export tool and drag the "PLC Generic Control Network"
object to the Import Export tool and drop it.
3. In the Add Item dialog press Finish. All instances has now been exported with
dependencies i.e the object types are included in the exported data.
4. Save the file on a media to transport it to the Compact HMI 800.
Import to Compact HMI 800
Before the import can be done, the "PLC Controller Type" objects representing the
controllers have to be manually created in the Compact HMI 800 system. This has
to be done because the configuration of these objects are dependent on the
installation of the drivers in the node. So before proceeding, the steps for creating a
new PLC Controller type should be followed for each controller. When all
controllers have been created and configured, continue with the steps below:
1. Copy the file to the Compact HMI 800 hard disc.
2. Double click the file to start the Import Export tool.
3. Select the Object Type structure in the structure selector box in the Import
Export tool.
4. Right click the PLC Object Types Object and select import and then Finish.
5. Select the Control structure in the structure selector box in the Import Export
tool.
6. Expand to see the PLC Controller Type objects.
7. For each PLC Controller Type object expand to see the children and use shift
click selection to select all child objects.
8. Right-click on the selected objects and select import.
9. In the Importing dialog box select Import Settings and remove the selection
"Include Dependencies".
10. Press Finish.
11. When asked for the restore path ("Do You want to place manually") select
"Apply to all Items" and Yes.
86
Section 4 Engineering
3BSE040587R4401