Out Of The Package; Checking Component Parts; Items To Be Furnished By User - Siemens 2D-TZ577 Instruction Manual

4 Out of the Package

4. Out of the Package

4.1 Checking Component Parts

The 2D-TZ577 Card comes standard with the component parts listed in the table below. Check your 2D-TZ577
Card to ensure that it is complete with these parts.
No.
[1] Instruction manual (CD-ROM)
[2] PROFIBUS DP-V0 Slave Interface Card
[3] Ferrite core
[4] GSD file (Included on the CD-ROM)
[5] Icon file for setting software (Included on
the CD-ROM)
[6] Cable clamp
[7] Cable clamp
Note: Numbers in the table corresponds to those in the figure below.
[1] [4] [5]

4.2 Items To Be Furnished by User

The following table shows the items that the user is requested to have ready before using the 2D-TZ577 Card.
Item
Master Station Master Station which is compatible with PFOFIBUS DP
*1
Communication Cable specifically designed for use with PROFIBUS DP
cable *
*1
Checking Component Parts 4- 18
Table 4-1 2D-TZ577 Component Parts
Item name
[2]
Figure 4-1 2D-TZ577 Component Parts (Illustrated)
Table 4-2 Items To Be Furnished by User
Requirement
There are limits to maximum total cable length and
inter-segment cable length. For details, see Figure
3-2 An Example of Basic PROFIBUS DP Network
Configuration.
Type name
BFP-A8745
TZ577
E04SR301334
MLFA0BE4.gsd
2DTZ577ICON.bmp
AL4
AL6
[3]
Mitsubishi Electric disclaims all
guarantees of PROFIBUS
system performance if any cable
or connector other than those
described here are used.
Quantity
1
1
2
1
1
1
1
[6] [7]
Remark