Starting The Brewing Process - Silvercrest SKML 1000 A1 Operating Instructions Manual

Starting the brewing process

WARNING
Risk of scalding!
► Hot steam escapes from the steam outlet
risk of scalding!
► Never open the filter basket holder
of hot steam may be released or hot water may spray out. There is a risk of
scalding!
WARNING
Risk of burns!
► After the brewing process, the hotplate
the keep warm process and heats up significantly. There is a risk of burns!
1) Use the dial
responding amount of water is in the water tank
NOTE
► Pressing the
coffee will be stronger. When the
2) Press the
process, the light element
3) When the coffee has finished running through, you will hear a beep.
The
NOTE
► You can stop the brewing process at any time by pressing the
4) The hotplate
press the
NOTE
► The appliance switches itself into standby mode automatically after
35 minutes. Press the
■ 28 │ GB │ IE
to select the required number of cups. Ensure that the cor-
button
button . The appliance starts the grinding and brewing
button stops flashing.
under the coffee pot
button again.
button
in the water tank
during the brewing process! Bursts
under the coffee pot
.
will cause more coffee to be ground and the
button
lights up, the button
keeps the coffee warm until you
to reactivate the appliance.
! There is a
starts
is activated it lights up.
starts to flash.
button
SKML 1000 A1
.