Brewing Coffee With Ground Coffee; Adding Ground Coffee; Filling The Appliance With Water - Silvercrest SKML 1000 A1 Operating Instructions Manual

Brewing coffee with ground coffee
Adding ground coffee
1) Open the filter basket holder
basket
2) Take a paper coffee filter (size 1 x 4) and fold its sides over. Insert the paper
filter into the filter basket
3) Fill the measuring spoon
4) Close the filter basket holder
NOTE
► Add around one level measuring spoon
of filter coffee. If the filter coffee is too strong, reduce the amount of ground
coffee per cup.
► The lid

Filling the appliance with water

WARNING
Health hazard!
► Use only drinking water for your coffee!
1) Open the lid of the water tank
use the coffee pot
"Before first use" and fill it directly. Select a quantity of water corresponding
to the required amount of filter coffee. Use the fill level indicator
water tank
2) Place the coffee pot
CAUTION
Property damage!
► Never fill the water tank
10 cups (MAX marking). When carrying out a run through with water only,
e.g. before first use or for cleaning, do not exceed the marking for 8 cups
on the fill level indicator
► Never fill the water tank
NOTE
► During the brewing process, the amount of water decreases: some evapo-
rates and the coffee grounds also retain some water. This is why the volume
of coffee in the coffee pot
water you filled into the water tank
SKML 1000 A1
.
.
with ground coffee.
is not required for the brewing process using ground coffee.
and fill the water tank
or remove the water tank
for reference. Close the lid of the water tank
back in the appliance.
to more than the total amount required for
!
with less than 2 cups of water.
is always slightly less than the amount of
and take the filter basket lid
.
of ground coffee for each cup
as described in the section
.
off the filter
with water. To do so,
on the
again.
GB │ IE │ 29 ■