Starting The Brewing Process - Silvercrest SKML 1000 A1 Operating Instructions Manual

Starting the brewing process

WARNING
Risk of scalding!
► Hot steam escapes from the steam outlet
risk of scalding!
► Never open the filter basket holder
of hot steam may be released or hot water may spray out. There is a risk of
scalding!
WARNING
Risk of burns!
► After the brewing process, the hotplate
the keep warm process and heats up significantly. There is a risk of burns!
1) Press the
2) Press the
element
3) When the coffee has finished running through, you will hear a beep.
The
NOTE
► You can stop the brewing process at any time by pressing the
4) The hotplate
press the
NOTE
► The appliance switches itself into standby mode automatically after
35 minutes. Press the
■ 30 │ GB │ IE
button to switch off the grinder. The
button . The appliance starts the brewing process, the light
lights up, the button
button stops flashing.
under the coffee pot
button again.
button
in the water tank
during the brewing process! Bursts
under the coffee pot
button
starts to flash.
keeps the coffee warm until you
to reactivate the appliance.
SKML 1000 A1
! There is a
starts
lights up.
button .