Making Coffee; Inserting Ground Coffee - Silvercrest SKA 1000 A1 Operating Instructions Manual

4) Rinse the filter holder
Place the filter holder
vacuum flask
5) Fill the water tank
appliance over a sink and pour out the water. When you turn the appliance
around again, water will escape from the appliance. Hold the appliance
over the sink until no more water escapes. Then carefully dry the appliance.
6) Fill the water tank
7) Close the appliance lid
8) Place the lid
the appliance.
9) Press the AN/AUS button
control lamp BRÜHVORGANG
finishes and you hear 6 acoustic signals.
10) Empty the vacuum flask
11) Wait until the appliance has cooled down, then rinse the filter holder
clean water again.
The appliance is now ready for use.
Making coffee
Inserting ground coffee
1) Open the appliance lid
2) Take a paper coffee filter (size 1 x 4) and fold its sides over. Insert the paper
filter into the filter holder
3) Use the measuring spoon to insert ground coffee into the filter.
NOTE
► Use approximately one flat measuring spoon of ground coffee for each
cup of filter coffee. If the filter coffee is too strong, reduce the amount of
ground coffee per cup.
■ 24
│ GB
and lid of the vacuum flask
back in the appliance. Screw the lid
.
with water. To empty it again, carefully turn over the
with water up to the MAX mark.
.
back on the vacuum flask
. The display
will light up. Wait until the brewing process
and rinse it with clean water again.
. The filter holder
.
with clean water.
back on the
. Place the vacuum flask
will read BREW and the red
is already inserted.
SKA 1000 A1
in
with