4) Press and hold the AUTO/PROGRAMM button
seconds until the green control lamp AUTO
that the timer is active and the appliance will initiate the brewing process at
the set time.
NOTE
►
You can use the AN/AUS button
■
As soon as the set time is reached, the brewing process begins. The green control
lamp AUTO
lights up. The display
■
As soon as the brewing process is completed, 6 acoustic signals sound and
the appliance switches itself off.
Cleaning and care
Cleaning
DANGER – RISK OF ELECTRICAL SHOCK!
WARNING – RISK OF INJURY!
►
Always remove the plug from the mains power socket before you clean the
appliance. Danger of electric shock!
►
Always allow the appliance to cool down before cleaning it. Risk of burns!
CAUTION – PROPERTY DAMAGE!
►
Never use abrasive, aggressive or chemical cleaning agents to clean the
appliance. These could damage the outer surface of the appliance.
1) Remove the plug from the power socket and allow the device to cool down
completely.
2) Open the appliance lid
holder
Dispose of the paper filter.
SKA 1000 A1
goes out and the red control lamp BRÜHVORGANG
will read BREW.
Never immerse the appliance in water or other liquids. Danger of
electric shock!
and remove the paper filter together with the filter
.
for approximately 3
lights up. This light indicates
at any time to deactivate the timer.
27
■
GB
│