Operation And Use; Charging The Power Bank - Silvercrest SPBL 6000 A1 Operation And Safety Notes

DANGER Improper handling of lithium polymer
batteries can result in fire, explosions, hazardous sub-
stances leaking, or other dangerous situations! Do not
throw the product into the fire, as this could lead to the
built-in battery exploding.
Observe the usage restrictions and prohibitions of use for
battery-operated products in situations which may be haz-
ardous such as at petrol stations, airports, hospitals, etc.
WARNING During charging process, please be
noticed that the product must not be covered. Otherwise
the product can be heated.

Operation and use

Charging the power bank

Because of this power bank high current consumption,
never use a notebook or PC USB port to charge the
power bank.
Only use a suitable USB power adapter for charging
this power bank (5 V
The built-in rechargeable battery must be fully charged
before using the product.
To charge the power bank
with an output voltage of 5 V and an output current of at
least 3 A.
Connect the USB cable
port
of the power bank
5
Connect the other end of the USB cable
A) to a USB power supply (not included in the scope of
delivery) (see fig. A).
This power bank also can be charged via the USB-C port.
You can use the provided USB cable with adaptor Micro-
USB to USB-Type C
can use a separate USB type C to Type C connection
cable together with USB Power adapter for charging
power bank (but they are not contained in the contents
of delivery).
24 GB/IE
, min. 3 A; not supplied).
only use power supplies
1
with the Micro-USB input
8
.
1
for charging power bank. Or you
8
(USB Type
8