Rectifier - Huawei TP48200A-HX09A2 User Manual

TP48200A-HX09A2, TBC300A-TCA2 Outdoor Power
System
User Manual
Table 2-2 DC PDU configurations
DC Output
Battery circuit breaker
Load circuit breaker
Battery Switch
Figure 2-7 Battery switch
(1) Battery switch



2.3 Rectifier

Appearance
Figure 2-8
Issue 02 (2019-02-26)
The battery switch is set to AUTO by default before delivery, meaning that the system is
under automatic control.
Open the panel and set the battery switch to MANUAL only when you want to power on
the battery forcibly for commissioning. Remember to set the battery switch back to AUTO
after the commissioning.
shows a rectifier.
Copyright © Huawei Technologies Co., Ltd.
Standard Configuration
Four 1-pole 125 A circuit breakers

BLVD circuit breaker: two 1-pole 100 A
circuit breakers and two 1-pole 16 A
circuit breakers

LLVD circuit breaker: one 1-pole 63 A
circuit breaker, one 1-pole 32 A circuit
breaker, and one 1-pole 16 A circuit
breaker
NOTE

Two 16 A BLVD circuit breakers supply
power for the TECs in the two battery
cabinets.
 If a lamp is configured, use one appropriate
load circuit breaker for it.
2 Components
13