Chapter 1 Installing OS
1.4
Enabling FC card
The following procedure shows when installing or reinstalling ESXi to the external storage.
1.
Turn on the display and the peripheral equipment connected to the server.
2.
Remove the front bezel.
3.
Press the POWER switch that is located on the front side of the server.
Lift the acrylic cover, and press the POWER switch.
Important
After a while, the "NEC" logo will appear on the screen.
Note
If the power cords are connected to a power controller like a UPS, make sure that it is
powered on.
Do not turn off the power before the "NEC"
logo appears.
Tips
While the "NEC" logo is displayed on the screen, the server performs a power-on self test
(POST) to check itself. For details, refer to Chapter 3 (1.1 POST Check) in User's Guide.
Note
If the server detects errors during POST, it will interrupt POST and display the error
message. Refer to Chapter 1 (6.2 POST Error Message) in Maintenance Guide.
Express5800/R320d-E4, R320d-M4 Installation Guide (VMware 5.5)
Acrylic cover
POWER switch
1. Setup Procedure
21