Preinclination - NEC Express 5800 Series Installation Manual

Chapter 2 Installing Bundled Software

1.1.1 Preinclination

SNMP is used for reporting to NEC ESMPRO Manager. Provide settings for SNMP as shown below.
1. Log in to ftSys Management Appliance as a root user.
2. Edit the /etc/snmp/snmpd.conf.
Change the /etc/snmp/snmpd.conf, and, for ESMPRO MIB (.1.3.6.1.4.1.119.2.2.4.4), set a right of the
community in "READ WRITE".
In the example below, "READ WRITE" authority is given to all MIB (.1 subordinates) of default
community (public).
Example
####
# Third, create a view for us to let the group have rights to:
#
#view
#view
view
####
# Finally, grant the group read-only access to the systemview view.
#
#access notConfigGroup ""
access notConfigGroup ""
3. Check the runlevel 3 and 5 of snmpd is on.
# /sbin/chkconfig --list snmpd
snmpd
- In the case of on, restart snmpd.
# /etc/init.d/snmpd restart
- In the case of off, change setting of snmpd, and start snmpd.
# /sbin/chkconfig --level 35 snmpd on
# /etc/init.d/snmpd start
4. Check the runlevel 3 and 5 of portmap is on.
# /sbin/chkconfig --list portmap
portmap
- In the case of on, it is not necessary to change setting of portmap.
- In the case of off, change setting of portmap, and start portmap.
# /sbin/chkconfig --level 35 portmap on
# /etc/init.d/portmap start
70
name incl/excl
systemview included
systemview included
all included
group context sec.model sec.level prefix read
any
any
Note
Refer to Help of snmpd.conf for detailed procedure. Run man command to open Help of
snmpd.conf.
0:off 1:off 2:off 3:on
0:off 1:off 2:off 3:on
Express5800/R320d-E4, R320d-M4 Installation Guide (VMware 5.5)
subtree mask(optional)
.1.3.6.1.2.1.1
.1.3.6.1.2.1.25.1.1
.1 80
noauth exact systemview none none
noauth exact all
4:off 5:on
4:off 5:on
1. Bundled Software for the Server
Modify these lines.
– Comment out the existing
description.
– Add new descriptions.
write notif
all none
6:off
6:off