Installing Ftsys Management Appliance; Checking The Installation Destination Disk - NEC Express 5800 Series Installation Manual

Chapter 1 Installing OS
1.8

Installing ftSys Management Appliance

Connect to the ESXi host from vSphere Client to install.

1.8.1 Checking the Installation Destination Disk

1. Select the ESXi Host in vSphere Client, select a storage from the list of [Storage] in the [Summary] tab
to display the properties.
42
•
Important Be sure to connect to the ESXi host from vSphere Client.
Do not connect to the vCenter Server.
•
Do not add ESXi host to vCenter Server before the installation of ftSys
Management Appliance completes.
Note ftSys Management Appliance must be installed on the disk where the ESXi host exists. If
several disks are contained in your system, perform the steps below in advance.
Express5800/R320d-E4, R320d-M4 Installation Guide (VMware 5.5)
1. Setup Procedure