Front Cover Sensor - Brother DCP-L8400CDN Service Manual

(7) Disconnect the Connector (CN8).
(8) Remove the Laser unit from the Scanner plate.
Harness routing: Refer to

9.48 Front Cover Sensor

(1) Release the wiring of the Front cover sensor.
(2) Release the two Hooks and remove the Front cover sensor from the Main body.
Front cover sensor
Harness routing: Refer to
CN8
Fig. 3-196
" Laser Unit"
Hook
Fig. 3-197
" Process Drive Unit, Front Cover Sensor, Main Drive Unit"
3-143
Laser unit
Scanner plate
<Front side>
Hook
Main body
<Front side>
Confidential