Paper Eject Origin Sensor - Brother DCP-L8400CDN Service Manual

Assembling Note:
After assembling the Eject ground wire 1 and Eject ground wire 2, check the conduction
between the Middle roller shaft and the Cooling roller shaft.
Paper eject ASSY
(3) Release the wiring of the Paper eject origin sensor.
(4) Release the two Hooks and remove the Paper eject origin sensor from the Paper eject
ASSY.
Hook

Paper eject origin sensor

Harness routing: Refer to
Cooling roller shaft
Fig. 3-221
Hook
Hook
Paper eject origin sensor
Fig. 3-222
" Paper Eject ASSY"
3-158
Middle roller ASSY
Middle roller shaft
Hook
Paper eject ASSY
Eject cooling
roller ASSY
Confidential