T1 Paper Feed Sensor Pcb Assy - Brother DCP-L8400CDN Service Manual

9.67 T1 Paper Feed Sensor PCB ASSY

(1) Release all the wiring from the MP drive frame.
(2) Remove the three Taptite bind B M3x10 screws and remove the MP drive frame from the
Paper feed unit.
MP drive frame
Taptite bind B M3x10
Taptite bind B M3x10
Note:
- As the MP drive shaft gear Z17M07, MP lift lever and Registration roller drive joint tend to
come off, be careful not to lose them.
- When the MP drive shaft gear Z17M07 and MP lift lever come off, assemble them as
shown in the figure.
Registration roller drive joint
Fig. 3-259
Fig. 3-260
3-179
Paper feed unit
MP lift lever
MP drive shaft gear
Z17M07
Paper feed unit
Confidential