Low-Voltage Power Supply Pcb Unit - Brother DCP-L8400CDN Service Manual

9.62 Low-voltage Power Supply PCB Unit

(1) Remove the Screw pan (S/P washer) M3.5x6 screw and remove the FG harness of the
Inlet harness ASSY from the LVPS plate.
(2) Remove the Taptite flat B M3x10 screw and remove the Inlet harness ASSY from the
Main body.
(3) Release the wiring of the Inlet harness ASSY.
(4) Release the wiring of the LVPS-heater harness ASSY.
Main body
Inlet harness ASSY
Taptite flat B M3x10
Fig. 3-229
3-163
LVPS plate
FG harness of the
Inlet harness ASSY
Screw pan
(S/P washer) M3.5x6
<Back side>
Confidential