T2 Relay Pcb Assy - Brother DCP-L8400CDN Service Manual

10.5 T2 Relay PCB ASSY

(1) Disconnect all the Connectors from the T2 relay PCB ASSY.
T2 relay PCB ASSY
(2) Remove the Taptite cup S M3x6 SR screw and remove the T2 relay PCB ASSY from the
T2 frame L unit.
2b
Taptite cup S M3x6 SR
T2 relay PCB ASSY
<Left side>
(Not used) (T2 paper edge sensor) (T2 plate-up detection sensor)
(T2 solenoid)
Fig. 3-279
2a
T2 frame L unit
Fig. 3-280
3-191
(T2 connector)
(T2 plate-up motor)
Confidential