9.14 Carriage PCB ASSY, Ink Refill ASSY and Ink Cartridge Detection Sensor
PCB
Carriage PCB ASSY (Carriage PCB with carriage flat cables)
(1) Remove the carriage PCB ASSY from the head/carriage unit, by performing steps (7)
through (11) in
(2) Release the carriage flat cables from the cable guides on the tube support plate and take
them out together with the flat core.
Note: When replacing the carriage PCB ASSY, remove the flat core from the old carriage
flat cables and set it to the new ones.
CR guide rail
Tube support plate
Section 9.3 "Head/Carriage Unit."
Carriage PCB ASSY
Flat core
3-90
Carriage flat cables
Confidential
(3_080)