Eeprom Write Error; Document Removed At Phase B. (Detected By The Document Detection Sensor); Lcd Connection Failure - Brother DCPJ525W Service Manual

Error Code E6
Unable to Init. E6

EEPROM write error.

Step
1 Main PCB defective
Error Code EA
DOCUMENT JAM

Document removed at phase B. (Detected by the document detection sensor)

User Check
- Send a fax again.
Step
1 Document detection actuator out
of place
2 Document detection sensor
defective
3 Main PCB defective
Error Code EC
Unable to Init. EC

LCD connection failure.

Step
1 LCD flat cable connection failure
2 LCD defective
3 Main PCB defective
Cause
Replace the main PCB ASSY.
Cause
Set the document detection actuator into place.
Replace the document detection sensor PCB ASSY.
Replace the main PCB ASSY.
Cause
Check the connection and reconnect the flat cable.
Replace the LCD unit.
Replace the main PCB ASSY.
2-55
LCD
Solution
LCD
Solution
LCD
Solution
Confidential