Resetting purge or flushing count
1) Switch the machine to the maintenance mode.
2) Press the 8 and 0 keys in this order in the initial stage of the maintenance mode to call
up the machine's log information. (Function code 80. Refer to
chapter.)
3) Press the Black Start (Mono Start) key several times until the purge or flushing count
appears on the LCD.
4) Press the 2, 7, 8, and 3 keys in this order to reset the purge or flushing count.
5) Press the Stop/Exit key to return the machine to the initial stage of the maintenance
mode.
6) Press the 9 key twice to return to the standby state.
5-59
Section 1.4.31
in this
Confidential