Brother DCPJ525W Service Manual page 317

(2) On the machine, press the 5 and 8 keys in this order.
The "Select 58?" appears on the LCD.
(3) Press the Black Start (Mono Start) key.
The "1.PF 2.EXIT" appears on the LCD.
(4) To select the paper ejection roller adjustment, press the 2 key.
The "EXIT ADJ NO. +0" appears on the LCD.
(5) On the "EXIT adjust check" patterns 1 to 3 (see
through EXIT6 rows.
First, on the EXIT1 row, select the block that is the least uneven print and enter the number
of the least uneven block. For the entry method, refer to the paper feed roller adjustment
procedure, step (5).
If it is difficult to judge which block is the least uneven print between the adjacent two
blocks, e.g., between +2 and +4 blocks, enter the number (+3 in this case) between them.
Press the OK key.
(6) In the same way as in step (5), enter the number of the least uneven block for each of
EXIT2 through EXIT6.
For adjustment of horizontal streaks
(1) On your PC, drag and drop the "LF300adj.prn" onto the Brother Maintenance USB Printer
driver icon in the Filedrgs window.
The machine displays the "Receiving Data" on the LCD and prints out "KEISEN2 &
LF300 & EXIT ADJUST PATTERN" (see
Tip: The check pattern can also be printed with Function code 61 (refer to
this chapter). After printing with a memory card, be sure to remove the card before
proceeding to the following step.
(2) On the machine, press the 5 and 8 keys in this order.
The "Select 58?" appears on the LCD.
(3) Press the Black Start (Mono Start) key.
The "1.PF 2.EXIT" appears on the LCD.
(4) Press the key several times to display the "1.LF300" on the LCD.
(5) Press the 1 key to display the "LF300 ADJ No. +0."
(6) Check the LF300 ADJUST pattern (see
and black streaks, and enter the number of that block. For the entry method, refer to the
paper feed roller adjustment procedure, step (5).
pages 5-35
page 5-38 for a sample printout).
page 5-38), select the block that has the least white
5-33
through 5-37), check EXIT1
Section 1.4.19
Confidential
in