Brother DCPJ525W Service Manual page 195

ADF front cover and ADF document support
(5) Turn the ADF & document cover ASSY upside down.
(6) Remove the ADF front cover while releasing the four retainers in the direction of the
arrows shown below using a flat screwdriver.
(7) Turn the ADF & document cover ASSY right side up.
(8) Remove the ADF document support.
(9) With the ADF document support flap being closed, first pull out the rear boss and then
release the front one.
Assembling Note: When setting the ADF document support flap into place, first fit the front
boss into the ADF document support and then slide the rear one into it.
Retainer
ADF document support
(Rear)
3-58
ADF & document cover ASSY
Retainers
ADF document
support flap
ADF & document cover ASSY
Retainer
ADF front cover
(3_050)
(3_051)
Confidential