Assembling Notes:
• After mounting the document scanner open actuator, check that the actuator springs back if
pressed with a finger.
• When mounting the control panel PCB ASSY, first fit it below the four tabs on the control
panel base and then secure it with the four latches (see the previous page). Make sure that the
cable linking the two PCBs is threaded through the cable guide as shown below.
MFC with touch panel
Panel PCB ASSY
Grounding wire
MFC without touch panel
Panel PCB ASSY
Viewed from the bottom
Cable guide
LCD flat cable
Viewed from the bottom
LCD flat cable
3-72
*1 For models with touch panel
*2 For models with touch panel & 1.9-inch LCD
Control panel base
2
LED harness *
1
Touch panel harness *
Panel harness
Control panel base
Panel harness
(3_066_MFCJ825DW)
(3_066_MFCJ430W)
Confidential