Brother DCP-L8400CDN Service Manual page 509

APPENDIX 2 DELETION OF USER SETTING
In this machine, the user setting information is stored in the main PCB. The following
procedure allows the factory default settings to be restored in the machine.
<Operating procedure>
(1) Press the
(2) Press the All Settings key on the LCD.
(3) Press the Initial Setup key on the LCD.
(4) Press the Reset key on the LCD.
(5) Press the Factory Reset key on the LCD.
(6) When "Factory Reset? It may take time until reset finishes. Yes No" is displayed on the
LCD, press the Yes key.
(7) When "Reboot OK? Press [Yes] for 2 seconds to confirm." is displayed on the LCD, hold
down the Yes key for 2 seconds or more. Then, the user settings are cleared, and the
machine returns to the ready state.
INFORMATION
(Settings) key on the LCD in the ready state.
App.2-1 Confidential