Table of Contents
Advertisement
4. Disconnect the connector CN12 from the MB-666 board.
5. Loosen the four screws and pull out the CCD unit.
PWH4 x 8
PWH4 x 8
6. Install the HKC-7080 in the reverse order of removal.
m
. Be very careful not to touch the surface of the filter disk unit when installing the HKC-7080.
. Be sure to remove the dust protection cover from the HKC-7080 previously.
HKC-7080
CCD unit
CN12/MB-666
1-3. Replacing CCD Unit
1-3 (E)
Advertisement
Table of Contents
