Table of Contents
Advertisement
1-3. Replacing CCD Unit
1-3-3. Disconnecting/Connecting Flexible Card Wire
The flexible card wire is used between the MB-666 board and the DR-264 board. Take extreme care not
to break the flexible card wire.
Disconnecting
1. Turn off the power.
2. Slide portions A in the direction of the arrow to unlock and pull out the flexible card wire.
Connecting
m
. Be careful not to insert the flexible card wire obliquely.
. Check that the conductive surface of the flexible card wire is not soiled with dust.
1. Slide portions A in the direction of the arrow and insert the flexible card wire as far as it will go with
the conductive surface down.
2. Slide portions A in the reverse direction to lock.
A
A
Conductive
surface
1-4 (E)
HKC-7080
Advertisement
Table of Contents
