Table of Contents
Advertisement
3-1-3. Maintenance Menu
The Maintenance menu is used for adjustment items necessary for camera's maintenance, such as shading
adjustment and so on. To activate the Maintenance menu, first display the TOP menu.
(Boxed items under "Settings" indicate the factory setting.)
Page
Ver.
Item
Auto Setup
Auto Black
Auto White
Auto Level
TEST
White Shading
V SAW R/G/B/M
V PARA R/G/B
H SAW R/G/B
H PARA R/G/B
White R/G/B
Auto White
Clear
Black Shading
V SAW R/G/B
V PARA R/G/B
H SAW R/G/B
H PARA R/G/B
BLK Set R/G/B
BLK R/G/B/M
Master Gain
Clear
e) When executing the Auto Level, paint data is temporarily cleared and the automatic level adjustment is performed in sequence. After
the adjustment is complete, adjustment result is stored as a master setup data.
HKC-7080
Settings
Throw MENU SELECT
switch to ENTER to execute
Throw MENU SELECT
switch to ENTER to execute
Throw MENU SELECT
switch to ENTER to execute
[Off], 1, 2
_99 to +99 ([XX])
_99 to +99 ([XX])
_99 to +99 ([XX])
_99 to +99 ([XX])
_99 to +99 ([XX])
Throw MENU SELECT
switch to ENTER to execute
Throw MENU SELECT
switch to ENTER to execute
_99 to +99 ([XX])
_99 to +99 ([XX])
_99 to +99 ([XX])
_99 to +99 ([XX])
_99 to +99 ([XX])
_99 to +99 ([XX])
_3, [0], 3, 6, 12 dB
Throw MENU SELECT
switch to ENTER to execute
Contents
Starts to automatically adjust the black balance
(To abort a processing during execution, throw MENU SELECT
switch to ENTER)
Starts to automatically adjust the white balance
(To abort a processing during execution, throw MENU SELECT
switch to ENTER)
Starts to automatically adjust the level in the internal circuits
(To abort a processing during execution, throw MENU SELECT
switch to ENTER)
Selects the TEST signal
Off: No test signal is output
1:
Outputs the sawtooth waveform test signal
2:
Outputs the 3-step waveform test signal
Adjusts the volume of V.SAW compensation for the R, G, B or
master white shading
Adjusts the volume of V.PARA compensation for the R, G, or B
white shading
Adjusts the volume of H.SAW compensation for the R, G, or B
white shading
Adjusts the volume of H.PARA compensation for the R, G, or B
white shading
Adjusts the R, G, or B white level
Starts to automatically adjust the white balance
Resets numeric settings on the White Shading page to 0
(When you throw MENU SELECT switch to ENTER, the "Clear"
indication flashes. Throw MENU SELECT switch to ENTER
again to execute; throw to CANCEL to cancel)
Adjusts the volume of V.SAW compensation for the R, G, or B
black shading
Adjusts the volume of V.PARA compensation for the R, G, or B
black shading
Adjusts the volume of H.SAW compensation for the R, G, or B
black shading
Adjusts the volume of H.PARA compensation for the R, G, or B
black shading
Adjusts the volume of black set compensation for the R, G, or B
black shading
Adjusts the R, G, B or master black level
Selects the master gain value
Resets numeric settings on the Black Shading page to 0
(When you throw the MENU SELECT switch to ENTER, the
"Clear" indication flashes. Throw the MENU SEL switch again to
execute; throw to CANCEL to cancel)
3-1. Setup Menu
3-1-3. Maintenance Menu
e)
3-11 (E)
Advertisement
Table of Contents
