Table of Contents
Advertisement
3-1. Setup Menu
DISPLAY switch
ON:
Displays characters and messages indicating the video camera settings and operation status
OFF:
No character or marker display appears on the viewfinder screen
MENU: The setup menu appears on the viewfinder screen
MENU SELECT control
Selects the menu item or setting value displayed on the viewfinder screen.
MENU SELECT switch
ENTER:
Enters the page/item select mode, or enters the setting values
CANCEL: Cancels the contents of a menu setting, or returns to the page select mode or TOP menu.
n
The TOP menu screen indicates the entire configuration of menu items. To display the TOP menu, set the
DISPLAY switch to MENU (from OFF) while pushing up the MENU SELECT switch to ENTER.
. . . . .
Basic operation
1. Displaying the menu
To display the Operation menu, set the DISPLAY switch to MENU.
To display the other menus than the Operation menu, first of all, the TOP menu shall be displayed.
To display the TOP menu, set the DISPLAY switch to MENU (from OFF) while pushing up the
MENU SELECT switch to ENTER. Then turn the MENU SELECT control to move the → cursor to
a menu item which you want and push up the MENU SELECT switch to ENTER.
2. To shift the page, turn the MENU SELECT control with a page scroll bar displayed at the top-right of
the screen until the desired page is displayed and push up the MENU SELECT switch to ENTER.
The menu enters the item select mode and the page scroll bar disappears.
3. To shift the item, turn the MENU SELECT control until the → cursor points the item to be set and
push up the MENU SELECT switch to ENTER.
4. To change the value, turn the MENU SELECT control.
You can change the values quickly by turning the MENU SELECT control fast. You can make very
fine adjustments by turning the control slowly.
By pushing up the MENU SELECT switch to ENTER, the setting is entered.
5. The menu is returned to the item select mode or page select mode every time the MENU SELECT
switch is pushed down to CANCEL.
6. To exit from the setup menu, set the DISPLAY switch to OFF.
. . . . .
ROM version
Contents in the menu and factory settings may differ from the descriptions in this manual depending on
the version of ROMs (IC24/SG-226, IC26/IF-569).
In this section, an item under "Ver." in the table shows a ROM version. If any version is given, it shows
that the function for the item is added or changed, and the ROM with that version or higher version
supports the function. If no version is given, it shows that every ROM version supports the function.
3-2 (E)
HKC-7080
Advertisement
Table of Contents
