Siemens RUGGEDCOM RX1512 Installation Manual page 40

5.
Installing a Module
To install a line module, do the following:
1.
2.
3.
4.
5.
RUGGEDCOM RX1512
Installation Manual, 07/2019, C79000-G8976-1057
[Optional] If necessary, install the device in the rack.
[Optional] If the device is installed in a rack, remove it from the rack.
Remove the current module from the slot.
Insert the new module into the slot.
Module
1
Chassis
2
Screw
3
Figure 4.3 Installing a Module
Tighten the screws to secure the module.
[Optional] If necessary, install the device in the rack.
4.2 Installing/Removing Line Modules
1
2
3
Modules
31