Display "Loading Via Tape" - Siemens SINUMERIK 840 Planning Manual

9 Examples

9.1.13 Display "Loading via tape"

9.1.13 Display "Loading via tape"
AUTOMATIC
Loading via tape:
Magazine:
T No.:
Size:
Status:
EB
Geometry:
750
L1:
L2: 300
R:
Spec. tool life:
Spec. tool life:
The recall key is unassigned in this display. A return to a higher menu level is possible only
with the function keys "Acknowledge" or "End of tape".
Softkey "POS. ACK."
A check is made whether an empty location of suitable size is available at the loading point in
accordance with the data entered in the loading line. If this is the case, the data of the loading
line are transferred to this location.
All tools loaded are replacement tools.
The next tool block of the tape NC program is read and displayed.
Softkey "NEG. ACK."
The data in the loading line are rejected.
The next tool block of the tape NC program is read and displayed.
Softkey "END TAPE"
Terminating loading process "Loading with operator guidance via tape" and return to menu
form "Loading/unloading via loading point".
9–14
T No.:
1
Duplo No.:
1
Type:
11
Cutting edge No.:
Wear:
Prewarning limit tool life:
500
500
POS.
ACK.
© Siemens AG 1991 All Rights Reserved
222
1
1
1
0.002
L1:
L2: 0.002
R:
NEG. END
ACK. TAPE
6FC5 197-0AA40-1BP1
SINUMERIK 840/880 (PJ)
11.92
1.1
50