Siemens SINUMERIK 840 Planning Manual page 332

11.92
Submagazine-specific machine data words for tool management
Data
word High-order byte (DL)
No.
DW 4
Bit 15
Submagazine 1, initial address (data word number)
m+4
DW 5
Bit 15
Submagazine 1, number of magazine locations (corresponds to number
m+5
of data words)
DW 6
Bit 15
Submagazine 1, allocated TO area
m+6
DW 7
Bit 15
Submagazine 1, number of the assigned magazine
m+7
(chained magazine, also background magazine)
.
Bit 15
.
.
DW 64
Bit 15
Submagazine 16, initial address (data word number)
m+64
DW 65
Bit 15
Submagazine 16, number of magazine locations (corresponds to number
m+65
of data words)
DW 66
Bit 31
Submagazine 16, allocated TO area
m+66
DW 67
Bit 15
Submagazine 16, number of the assigned magazine
m+67
PLC 1) Address m
< Software Version 6.1
1
2
_______
1) PLC 2 applies to SINUMERIK 880/880 GA2 only
© Siemens AG 1991 All Rights Reserved
SINUMERIK 840/880 (PJ)
Address m
> Software Version 6.1
2000 2000
2100 2250
6FC5 197-0AA40-1BP1
10 Data Fields
10.1.2 PLC machine data words (DB 61)
Low-order byte (DR)
Bit 0
Bit 0
Bit 0
Bit 0
Bit 0
Bit 0
Bit 0
Bit 16
Bit 0
10–3