Replacing A Temperature And Humidity Sensor (33010516) - Huawei FusionModule2000 V500R003C10 Maintenance Manual
Smart modular data center
Hide thumbs
Also See for FusionModule2000 V500R003C10:
- Installation manual (318 pages) ,
- Product description (217 pages) ,
- Maintenance manual (144 pages)
Table of Contents
Advertisement
FusionModule2000 Smart Modular Data Center
Maintenance Guide
Location
Hot aisle
Step 7 Install the air filter and close the rear door.
----End
5.4.11 Replacing a Temperature and Humidity Sensor (33010516)
Prerequisites
Context
A T/H sensor can be maintained only from the rear door.
Procedure
Step 1 Tap Shutdown on the controller home screen.
Exercise caution because the device is still energized after it is shut down on the controller
home screen.
Step 2 Open the rear door and remove the air filter.
Step 3 Remove the cable terminals from the RS485 ports on the T/H sensor, as shown in Figure 1.
Step 4 Pull out the T/H sensor in the direction shown in Figure 2.
Issue 04 (2020-01-03)
Display
Name
Hot aisle 1
temp/humid
Hot aisle 2
temp/humid
Hot aisle 3
temp/humid
Hot aisle 4
temp/humid
Hot aisle 5
temp/humid
A temperature and humidity (T/H) sensor needs to be replaced.
A spare T/H sensor of the same model is available and functional.
Copyright © Huawei Technologies Co., Ltd.
Address
DIP Switch Sequence No.
1
2
21
ON
OFF
22
OFF
ON
23
ON
ON
24
OFF
OFF
25
ON
OFF
5 Parts Replacement
3
4
5
ON
OFF
ON
ON
OFF
ON
ON
OFF
ON
OFF
ON
ON
OFF
ON
ON
6
OFF
OFF
OFF
OFF
OFF
95
Advertisement
Table of Contents
