Huawei FusionModule2000 V500R003C10 Maintenance Manual page 114

FusionModule2000 Smart Modular Data Center
Maintenance Guide
Impact on the System
The pad cannot be charged.
Preparations


Procedure
Step 1 Switch off the upstream power circuit breaker of the pad power connector.
Step 2 Remove the baffle plate under the power connector.
Step 3 Remove the charging cable from the power connector.
Step 4 Remove the pad power connector and its holder from the door box.
Figure 5-63 Removing a pad power connector holder and its holder
Step 5 Disconnect cables from the power connector.
Issue 04 (2020-01-03)
Tool: Phillips screwdriver
Materials: pad power connector, pad power connector holder
Copyright © Huawei Technologies Co., Ltd.
5 Parts Replacement
107