Message Parameter Interpretation - Fujitsu FLM 150 ADM Maintenance And Trouble Clearing

Maintenance and Trouble Clearing
FJTU-320-515-480
1.2

Message Parameter Interpretation

This section provides explanations of message fields or parameters for alarms,
transient or standing conditions, and example messages.
Note: The RTRV-AO report format is identical to the autonomous report REPT format
except for the termination indicator.
1.2.1 Interpreting Messages
Autonomous messages are reported by the FLM 150 ADM to the craft terminal
and/or the OSS computer display. They are embedded in the equipment firmware
and have the REPT prefix. The REPT messages are automatically displayed when
an event is triggered, provided the condition is not provisioned as NR (no report)
or its message category is not currently inhibited.
1.2.2 Message Retrieval
To retrieve alarm or condition messages, send the following commands:
• Alarm events—RTRV-ALM-ALL, RTRV-ALM-ENV, RTRV-COND-ALL
• Standing conditions—RTRV-COND-ALL
• Performance monitoring (PM) data—RTRV-PM-AIDTYPE
• All current and historical messages, including transient conditions and
database change reports—RTRV-AO
• The report may be limited to specific message categories (ALM, EVT, PM,
DBCHG) and specific sequences.
Issue 9, May 1999 FNC and FNC Customer Use Only
1.2: Message Parameter Interpretation
Vol. ll, Page 480.1-6