Fujitsu FLM 150 ADM Maintenance And Trouble Clearing page 184

Maintenance and Trouble Clearing
FJTU-320-515-480
Step 2 Edit the Direction.
a. Select the desired option.
b. Click OK.
c. Click Retrieve to verify that the command was successful.
d. Click Close. Is the Direction correct?
You have completed this procedure.
5.6.3 TL1 Procedure
Note: Verify that you receive a completed (COMPLD) response to each command before
going to the next step.
Retrieve the DIRN by using one of the following TL1 commands.
Step 1
RTRV-FFP-OC3:TID:AID:CTAG;
The DIRN keyword and the applicable domain show the current provisioning. The
possible settings are shown in the following table.
Is the facility provisioned correctly?
Call the Fujitsu Technical Assistance Center at
1-800-USE-FTAC (1-800-873-3822) for assistance.
Issue 9, May 1999
If Yes:
Keyword
DIRN
If Yes:
FNC and FNC Customer Use Only
5.6: Correcting Unidirectional or Bidirectional
If No:
Call the Fujitsu Technical Assistance Center at
1-800-USE-FTAC (1-800-873-3822) for
assistance.
Domain
UNI (unidirectional)
BI (bidirectional)
Go to Step 2.
Switch Provisioning
If No:
Vol. ll, Page 480.5-22