Fujitsu FLM 150 ADM Maintenance And Trouble Clearing page 187

Maintenance and Trouble Clearing
FJTU-320-515-480
Step 2 Edit the SDCC status.
a. Select In Service.
b. Click OK.
c. Click Initialize.
d. Click Retrieve to verify that the command was successful.
e. Click Cancel to close the dialog box. Is the channel in service?
You have completed this
procedure.
5.7.3 TL1 Procedure
Note: Verify that you receive a completed (COMPLD) response to each command before
going to the next step.
Retrieve the SDCC status by using the following TL1 command.
Step 1
RTRV-SDCC:TID:AIDs:CTAG;
The possible settings are IS (In Service) and OOS (Out of Service). Is the channel
in service?
Call the Fujitsu Technical Assistance Center at 1-800-
USE-FTAC (1-800-873-3822) for assistance.
Step 2 Edit the SDCC status by using the following TL1 command.
ED-SDCC:TID:AIDs:CTAG::::IS;
Issue 9, May 1999
If Yes:
Call the Fujitsu Technical Assistance
Center at 1-800-USE-FTAC
(1-800-873-3822) for assistance.
If Yes:
FNC and FNC Customer Use Only
5.7: Placing an SDCC In Service
If No:
If No:
Go to Step 2.
Vol. ll, Page 480.5-25