Precautions - Fujitsu PRIMERGY PG-RSBOP2 User Manual

Appendix

2 PRECAUTIONS

The following describes precautions when using the remote service board.
2.1 Voltage/Temperature Sensor No.
Voltage/temperature sensor Nos. on the remote service board are assigned from 0.
For this reason, the voltage/temperature sensor Nos. of the server unit displayed in related
software (ServerView, RemoteControlService, Web Interface) and the voltage/temperature
sensor Nos. in error messages shift by the number of remote service boards.
Voltage No.:
Temperature sensor No.:
The following are examples of displayed according to the number of remote service boards
mounted.
■ When this board is not mounted
[Voltage]
No.
0
1
:
■ When this board is mounted
[Voltage]
No.
0 RSB ExtPower
1 RSB PCI Power
2 RSB AUX Power
3 RSB Main Power
4 CPU0
5 CPU1
:
2.2 Initial Setup
Setup is as follows when the remote service board is installed.
Software Watchdog with ServerView setup
Power ON/OFF Timer with ServerView setup
24
4
1
Name
CPU0
CPU1
:
Name
:
[Temperature sensor]
No.
0 housing
1 CPU
: :
[Temperature sensor]
No.
0 housing (temperature on this board)
1 housing
2 CPU
:
:
:
:
: Disabled
: Disabled
Application
Application
:
:
:
: