If you then want to create a drive unit for two motors, the drive unit will still com-
prise one control unit and one active line module (infeed), but this time will include
two drives.
Fig. 2-5 shows the STARTER project navigator. A second drive unit unit with the
name Drive_Unit_Two_Motors, which is designed for two drives, has been con-
figured in the same project (Project_Philosophy).
Fig. 2-5
Siemens AG, 2004. All rights reserved
SINAMICS S120 Getting Started with the STARTER Commissioning Tool – 04.2004 Edition
Drive unit with two motors
Prerequisites
2-25