Fig. 5-14
4. Work through the Wizard by choosing Continue > until you reach the point at
which you configure the motor (see Fig. 5-15).
Note
You only have to change the motor configuration; leave the infeed etc. as they are.
6. Choose the motor
according to type
(order no.).
Fig. 5-15
5. Choose the motor type:
– 1FK6 synchronous motor
– 1PH7 induction motor
Siemens AG, 2004. All rights reserved
SINAMICS S120 Getting Started with the STARTER Commissioning Tool – 04.2004 Edition
Project Wizard
Motor configuration
Creating the Drive Project ONLINE
To work through the Wizard,
choose Continue >.
5. Choose the motor type.
5-69