Fig. 3-14
3. First choose the appropriate active line module from the Active line module
selection field according to type (order no.) (see type plate), assign a name
(Supply_1), and click the Line filter available field.
4. Choose Continue > to select further data for the active line module (infeed)
(see Fig. 3-15).
Fig. 3-15
5. Adapt the supply voltage and rated line frequency for the device accordingly. All
the other default settings are standard settings and can be left as they are.
Choose Continue >.
Siemens AG, 2004. All rights reserved
SINAMICS S120 Getting Started with the STARTER Commissioning Tool – 04.2004 Edition
SINAMICS_CU320 configuration for the active line module
Infeed: further data
Creating the Drive Project OFFLINE
3-41