Siemens SINAMICS S120 Getting Started page 35

Starter commissioning tool

Hide thumbs Also See for SINAMICS S120:

Table of Contents

When the module is ready for operation, the text "OK" appears in the field to the

right of the pushbutton (see Fig. 3-7).

In this case, the station address is displayed along with the additional current

bus parameters and version data.

Fig. 3-7

9. To display the stations, choose Read.

When the module is ready for operation, the system generates a list of all the

active stations on the bus.

The symbols for indicating the operating mode of the station have the following

meanings:

– An empty checkbox with a gray background (same background color as the

tab page): no partner device found

– Empty checkbox with a light background: passive station (e.g. DP slave)

– Checkmark on a light background: active station (e.g. DP master)

– Checkmark on a gray background: active station ready to be integrated in

the network

Note

This generates considerable load on the bus and may take a few seconds.

10.To complete the process of setting and diagnosing the PC/PG interface, choose

OK, OK and Continue >.

SINAMICS S120 Getting Started with the STARTER Commissioning Tool – 04.2004 Edition

SIMATIC NET diagnostics – CP5511 (PROFIBUS) after the test

Creating the Drive Project OFFLINE

3-35

Table of Contents