Creating the Drive Project OFFLINE
The Wizard guides you through the procedure for creating a new project.
4. Enter the project name and, if required, a comment (see Fig. 3-3).
Fig. 3-3
5. Choose Continue > to set up a PROFIBUS interface in the PC/PG.
Fig. 3-4
6. In this example, you need a PROFIBUS interface in the PC/PG. Choose
Change and test....
3-32
Creating a new project
Setting up the interface
SINAMICS S120 Getting Started with the STARTER Commissioning Tool – 04.2004 Edition
Siemens AG, 2004. All rights reserved