Siemens SINUMERIK 840D sl Commissioning Manual page 107

Figure 8-1
Detailed view
To display the current values, use the cursor to select the required area and press the
"Details" softkey.
● The block header contains the number and name of the machine data.
● The currently set values are output on the lines below.
● You can change the memory setting in the gray field, after "New value" or "New number",
● The total available memory, taking into account any modified values, is updated in the
Commissioning HMI-Embedded (IM2)
Commissioning Manual, 01/2008, 6FC5397-8CP10-1BA0
Static user memory (SRAM)
to the right of the field containing the actual value. This new setting is entered
temporarily. Your entry is automatically checked for limits and an appropriate message
output in the dialog line if you make a mistake.
lower part of the screen.
– The "Axis+" and "Axis-" softkeys are displayed for axis-specific machine data.
– The "Channel+" and "Channel-" are softkeys displayed for channel-specific machine
data.
8.2 Displaying and Editing System Resources
Diagnostics/Service
107