Data Backup; Introduction - Siemens SINUMERIK 840D sl Commissioning Manual

Data Backup

7.1

Introduction

Execution
You should backup your data
● after commissioning,
● after changing machine-specific settings,
● after service (e.g., after replacing hardware or software), in order to resume operation
● during commissioning, whenever you change the memory configuration.
The modified data can be stored over all furnished drive connections.
Required accessories
You will require the following accessories in order to save data:
● Keyboard, for upper and lower case.
Prerequisite
● To store data to the CompactFlash card you need the license release for the additional
● All configured network drives must be permanently accessible while HMI-Embedded is
Save area
● The area indicates which data are to be backed up or retrieved (general, channel-
● The unit defines the channel, the axis or the TOA area. The unit does not have to be
● The type determines the data type. During a data backup, the file names are created and
Commissioning HMI-Embedded (IM2)
Commissioning Manual, 01/2008, 6FC5397-8CP10-1BA0
quickly
256 MB HMI user memory.
running.
specific, or axis-specific).
specified if the entire area is selected.
output automatically.
7
99