7.2
Data backup via user interface
Save archive
For SINUMERIK 840D sl, the data backup of various components is divided as follows:
1. Data backup for NCK with/without compensation data
2. Data backup for PLC
3. Drive data
The procedure for this data backup is described in the previous chapter.
See Output of data (Page 97)
Save files
● In the "Services" and "Commissioning" operating areas, you can save individual
● If you edit files or programs in the operating area commissioning, softkey
● Further, in the operating areas program, services and commissioning, you can save data
Commissioning HMI-Embedded (IM2)
Commissioning Manual, 01/2008, 6FC5397-8CP10-1BA0
directories or files/programs on the configured drives using the "Copy" and "Paste"
softkeys.
"Commissioning", then you can save the changes also using the "USB front" softkey
directly on the USB FlashDrive that you have inserted in the front USB interface.
on all of the configured drives (logical drives).
Data Backup
7.2 Data backup via user interface
101