Structure Of The Commissioning File; Brief Description Of The Most Important Variables - Siemens SINUMERIK 840D sl Commissioning Manual

Tool management

5.2 Structure of the commissioning file

5.2 Structure of the commissioning file
The commissioning file is a part program e.g. _N_MAGKONF_MPF.
Structure of the part program
● Delete data example.
● Define the type of search strategy.
● Define a tool magazine.
● Define a buffer magazine.
● Define a load magazine.
● Define locations of the real tool magazine.
● Define locations of the buffer magazine.
● Define spindle assignment, (which buffer belongs to the spindle).
● Define the locations for the load magazine.
● Define clearances (offset) to the tool magazine. Which spindle, gripper, loading point
5.3

Brief description of the most important variables

An overview of the most important variables is subsequently provided.
Brief description
$TC_MAP3
$TC_MAP3[MagazineNo]=status of magazine
Default = 17 means: Active magazine, enabled for loading
$TC_MAMP2
$TC_MAP3[MagazineNo]=status of magazine
This mask is divided into right and left bytes. A value must be specified for both strategies.
The right byte describes the tool search.
The left byte describes the empty location search for the spindle tool.
$TC_MPP1
$TC_MPP1[MagazineNo, LocNo]=Type of location:
Default: Value corresponding to location type
88
belong to which tool magazine.
Magazine description data
Search strategy
Location type
Commissioning HMI-Embedded (IM2)
Commissioning Manual, 01/2008, 6FC5397-8CP10-1BA0